Reflective Cloth
Industrial Washable Reflective Fabric
T/C Backing Reflective Fabric
100% Polyester Reflective Fabric
Reflective Flame Retardant Fabric
Elastic Reflective Fabric
Colored Reflective Fabric
Custom Reflective Fabric
Prismatic PVC Series
Prismatic PVC Tape
Prismatic PVC sheet
Prismatic PVC Roll
Custom Prismatic PVC Products
Reflective Heat Transfer Film
Printable Reflective Heat Transfer Film
High Silver Reflective Heat Transfer Vinyl
High Intensity Reflective Heat Transfer vinyl
Colorful Reflective Heat Transfer Film
Rainbow Reflective Heat Transfer Film
Reflective Products
Reflective Warning Tape
Reflective Thread/Yarn
Reflective Webbing Tape
Reflective Piping
Reflecltive Shoes Laces
Reflective Sheeting
HIP Prismatic Reflective Sheeting
Glass Beasds Reflective Sheeting
Prismatic PVC Reflecctive Sheeting
SOLAS Grade Reflective Tape
Custom Reflective Sticker
Photoluminescent Series
Photoluminescent Film
Photoluminescent Printed Signs
Custom Luminescent Tape
Photoluminescent Material for Clothes
Vehicle Reflective Marking Tape
DOT-C2 Reflective Tape
ECE 104R Reflective Tape
Reflective Tape Sticker
Road Safety Products
Reflective Vest
Reflective Cone Sleeve
Custom Road Safety ProductsNo. 25 , Weisideng Industrial Zone, No. 111 Jinyi Road, Shishi City, Fujian Province, China
phone : 86-595-88189852
Email : info@roadstarchina.com
Email : sales@roadstarchina.com
mobile : 86-15959578780
What is DOT C2 reflective tape? DOT C2 is a reflective tape that meets minimum reflective criteria in an alternating pattern of white and red. It must be 2” wide and it must be stamped with the DOT C2 marking. Two patterns are accepted, you may use the 6/6 (6″ red and 6″ white) or 7/11 (7″ white and 11″ red). How much tape is required? An evenly spaced pattern of strips 12”, 18” or 24” long may be used on each side of the trailer so long as at least 50% of each side is covered. At the back of the vehicle, two continuous strips must be used in the lower rear and two inverted L shapes of solid white must mark the top corners of the trailer. Trucks must be marked in a similar fashion. See images below.
read more
ANSI/ISEA 107-2015 American National Standard for High-Visibility Safety Apparel and Accessories This new edition consolidates the requirements of ANSI/ISEA 107-2010 and ANSI/ISEA 207, American National Standard for High-Visibility Public Safety Vests in an effort to establish a single, comprehensive document that considers all occupational tasks. The standard continues to present three performance classes of garments based on the amount of visible materials and design attributes incorporated into the final configuration, and identifies garment types based on expected use settings and work activities being performed. These are designated as off-road (type O), roadway and temporary traffic control (type R), or public safety activities (type P). Background Material and Retroreflective Requirements Garment Type Type "0" Type "R" Type "P" Supplemental Items Accessories Designation Off-road Roadway Fire, Police, EMS Personnel Garments with Legs, including Gaiters Gloves Arm or Leg Bands Headwear Performance Class Class 1 Class 2 Class 3 Class 2 Class 3 Class E NA NA NA Background Material Amounts 217 in2 775 in2* 1240 in2** 450 in2 775 in2 465 in2 10 in2 24 in2 78 in2 Retroreflective Material Amounts 155 in2 201 in2 310 in2 201 in2 310 in2 109 in2 10 in2 24 in2 10 in2 Width Minimums of Retroreflective Material 1" 1.38" 1" for split trim designs 2" 1" for split trim designs 2" 1" for split trim designs 2" 1" for split trim designs 2" 1" for split trim designs 1" 1" 1" Previous Standard and Class ANSI 107 Class 1 ANSI 107 Class 2 ANSI 107 Class 3 ANSI 207 NEW! ANSI 107 Class E NEW! NEW! Headwear Responding to user concerns, the 2015 standard makes allowance for garments sized to fit smaller workers, and adds specifications for accessories such as gloves and armbands. The standard details the performance requirements for all materials used in the construction of compliant high-visibility safety apparel (HVSA), specifies labeling requirements to identify the garment by performance class, type and by its flame resistance characteristics as defined in the standard and expands the examples of garment configurations to illustrate compliant and non-compliant designs. To comply with ANSI/ISEA 107-2015, a garment’s background material, and retroreflective or combined-performance material must be tested by an accredited laboratory. The manufacturer of the finished item then verifies that the garment or headwear meets all the requirements of the standard, and provides a Declaration of Conformity for each model. Examples of test forms and the Declaration of Conformity are included in the standard and located in the resource section below.
read moreNo. 25 , Weisideng Industrial Zone, No. 111 Jinyi Road, Shishi City, Fujian Province, China
phone : 86-595-88189852
Email : info@roadstarchina.com
Email : sales@roadstarchina.com
mobile : 86-15959578780
